Fully Automatic Electrically-Heated Steam Boiler

Fully Automatic Electrically-Heated Steam Boiler

Product Description

Fully Automatic Electrically-Heated Steam Boiler

Features:
It manufactures the most safe and ideal steam boilers with the advanced, top s
Ecurity techno-logy with high performance. It is attached with water tank, high
Pressure pump, fully automatic high & low water level cut-off device, relief v
Alve, pressure controller, the durable calorific wire for water level gauge, eac
H boiler welding seam has passed X-ray check. It proves to have reliable quali
Ty after the examination and confirmation from Special Equipment Supervision
& Inspection Dept.

The main performances & parameters
Model	DLD3-0.4-1	DLD6-0.4-1(2)	DLD9-0.4-1(2)		DLD9-0.4-1(2)
Heating power(kw)	3	6	9		12
Rated steam pressure	0.4bar
Steam output (kg. H)	4.5	9	13		17
Starting time(min)	22	9(12)
Outline dimension(mm)	500x360x750	600x360x980(Sonde) 635x500x980(Sonde)		630x380x950(Floating ball) 630x380x1200(Floating ball)
Volume(L)	12	16.1
Power source	220V 1pH. 50Hz	220V. 1pH. 50Hz 380V. 3pH. 50Hz		380V. 3pH. 50Hz

OSHIMA ON-V740C

Product Catalog OSHIMA ON-V740C Automatic Needle Detector


Product Description

Voltage: AC220-250V or 110V Power: 140w Size:1820mm x 1050mm x 900mm--or more hieght Detecting Width:600mm Detecting Height:200mm---584mm Weight: 150kgs  or more Min Metal Size Inspected: 0.5-0.7mm Sensitiveness Adjusting: 1-10 Non-grade adjusting

Specifications︰	with Higher Sensitivity, Special machine with Higher Detecting Height from 200mm to 584mm.
Advantages︰	High Sensitivity
Export Markets︰	all world, Japan, Korea, Europe, South-Asia
Standard Met︰	CE, ISO9001:2000

NHG600-900-1200

Product Catalog Fusing Press Machine NHG-600-900-1000-1200-1600-1800 - Nitex Brand



Product Description

The Fusing Width option as follows: 600mm, 900mm, 1000mm, 1200mm, 1400mm, 1600mm, 1700mm, 1800mm

Specifications︰	Power: 380v,50Hz, 3 Phase Fusing/working width: 600-900-1200mm Pressure system: Spring roller/ Pneumatic system with Air pump Target Temperature: 0--200, 0--240.
Advantages︰	1, High quality performance 2, with high quality famous brand spare. 3, with seamless belt for long time working.
Export Markets︰	Asia, America, Europe, Africa, Mid-east

SINTERACE

HPM-600CA

MODEL	HPM-600CA
POWER SUPPLY	Three phase or Single phase
RATED OUTPUT	HEATER：7,400W
	MOTOR：90W
FUSING WIDTH	600mm
PRESSURE	5.0kg/cm2
MAX.TEMPERATURE	200℃
INSTALLATION DIMENSIONS	2,050mm×1,200mm
WEIGHT	(approx.) 296kg
FEATURES	Drum heater assures sufficient material heating from the every start of operation, just the same as flat type heating. Temperature is automatically controlled by means of an electronic thermostat and SSR, and it maintains a sensitive thermostatic switch that turns on and off alternately, and the control temperature difference range is always within ±5℃. Uniformity and high pressure are maintained by a new air cylinder, a silicon rubber roller and pressure support roller. Anti-static type Teflon belt assures longer belt life, and belt cleaning and maintenance is easy made. Belt Warping Prevention Device (patent) maintains the belt at the same position at all times, so the operator needs only to insert the fabric. An inspection window in the center of the operation table provides a clear view of the fabric.

HP-800TS-Ⅱ

MODEL	HP-800TS-Ⅱ
POWER SUPPLY	Three phase or single phase
RATED OUTPUT	HEATER：4,500W
	MOTOR：90W(Strip-off device:25W)
MAX.TEMPERATURE	200℃
MAX.PRESSURE	500ｇ/cm2
MAX.BELT SPEED	6m/min
HEATING TIME	6～60sec
FUSING WIDTH	800mm
DIMENSIONS	1,240(W)×1,115(D)×1,280(H)mm
WEIGHT	(approx.) 230kg
FEATURE	A strong sillcon rubbered roller ensures uniform pressure. Electric thermostat and S.S.R(Solid State Relay) control the temperature difference to a minimum, and “electrical contactpointless” components are used. Belt warping is automatically corrected, therefore, the operator only needs to insert the material. A smooth-surfaced heat-proof Teflon belt is used, so belt cleaning is easy. A more powerful and quiet induction motor is used to increase efficiency. This machine has a larger receiver, which allow stacking of a larger quantity of products. A touch & open type side cover is used to make inspection and maintenance of the machine easier. Two cleaners are installed. One is on the belt and the other is on the drum to prevent trouble such as resin strike back. Casters allow easy movement of the machine therefore it’s position in the factory can be easily changed.

HP-125FA

MODEL	HP-125FA
POWER SUPPLY	Three phase
RATED OUTPUT	HEATER：4,500W
	MOTOR：400W
	VACUUM MOTOR：300W
PLATE DIMENSIONS	1,200mm×500mm
MAX.TEMPRERATURE	200℃
MAX.PRESSURE	380g/cm2
DIMENSIONS	1,200(W)×1,170(D)×1,550(H)mm
NET WEIGHT	(approx.) 380kg
FEATURES	In case of emergencies, just push the emergency button to raise the upper plate. The upper plate is coated with an anti-static Teflon sheet for soil-free operation. Any adhesive or other impurity which sticks to the plate car be removed with ease so that materials are always kept clean. Uses a special heater which exhibits excellent themal efficiency and assures a long service life. Aluminum is used for the upper plate, and the electronic themostat and SSR controls the temperature difference range to within±4℃. A 300W blow motor makes a powerful vacuum, and provides extra sucking powe

HP-900LF,LFS

MODEL HP-900LF,LFS

  

MODEL HP-900LF,LFS POWER SUPPLY Three phase RATED OUTPUT HEATER：12kw MOTOR：295W FUSHING WIDTH 900mm MAX.BELTSPEED 10.2m/min MAX.PRESSURE 41N/cm2（4.02kg/cm2） MAX.TEMPERATURE 195℃ HEATING TIME 6～28sec. DIMENSIONS 1,200×1,490×3,300mm WEIGHT (approx.) 450kg FEATURES This is a continuous type machine therefore production is greatly increased. The automatic Belt Warping Prevention Device keeps both the upper and lower belts in the same position. Using the feed back system, damage is prevented. (Patent Pending) Using the electronic thermostat and the SSR, the temperature difference’s range is kept at ±3℃. The SSR’s electronic parts have no contact points making for durability. Various stackers can be used with this machine. This machine has a front conveyor belt which greatly increases production levels. The Rotary Strip Off Device can be attached as optional equipment. By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely. The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0. The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy. The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt. The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used. An anti puckering roller is installed in this machine. This roller’s position can be adjusted. Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option) The pressure is easily adjusted. Depending on which of the optional tables is used, various shapes can be easily pressed.

 

HP-450M,MS

MODEL	HP-450M,MS
POWER SUPPLY	Single phase
RATED OUTPUT	HEATER：4kw
	MOTOR：33W
TEMPERATURE(MAX)	195℃
PRESSURE(MAX)	1.5kg/cm2
BELT SPEED(MAX)	8.7m/min
HEATING TIME	5～20sec
FUSING WIDTH	450mm
DIMENSION	W：1,660mm
	D：880mm
	H：460mm
NET WEIGHT	(approx.) 152kg
FEATURE	Automatic belt warping prevention device. Upper belt warpping prevention system adopt direct limit switch type like lower belt warping prevention system. Increase the fusing belt width for 450mm Adopted rubber driving roller for non-slip driving. MS MODEL has been equipped rotary strip-off device.

HN-670C,680C

MODEL	HN-670C,680C
DETECTION METHOD	Magnetic induction
DETECTION ABILITY	Φ0.8mm steel to small scissors
DETECTION ADJUSTMENT	Step-less
DETECTION WIDTH	600mm
DETECTION HEIGHT	100mm (Standard type)
ALARM METHOD	Buzzer , Lamp
BELT SPEED	(approx.) 40m/min
POWER SUPPLY	Single phase
RATED OUTPUT	(approx.) 140W
DIMENSIONS	1,050(L)×1,650(W)×920(H)mm
WEIGHT	(approx.) 250kg
FEATURES	●Blue LCD New conspicuous blue LCD indicates detecting positions,detection signal levels from each coil and more infomation. ●φ0.8mm  This machine has adopted new design detecting sensor so that φ0.8mm is available at Detecting 100mm height. It promises to increase detecting accuracy. ●30% up  New design detecting sensor has also good noise performance that is increased about 30% than previous model. ●30% up  The detecting sensitivity is more stable in the detecting area. The new model gets more stable result against NC products than before.(100 mm height) ●Sensitivity level monitor  New designed level monitor is more easy to check the sensitivity level and detecting position lamp is divided to 10 pieces that shows foreign object exactly. ●Return device  This machine has return device that the products return to a operator after making alarm when the machine detects foreign object in a products. ●40m/min (50/60Hz)  This belt speed that connect to detecting speed is no.1 on this class. ●Data collection  The detecting result is able to collected to your computer by optional software from the needle detector. The collected data can be used for analyzing. ●Counter/Product guider  These devices are option equipments

HN-670C,680C

MODEL	HN-670C,680C
DETECTION METHOD	Magnetic induction
DETECTION ABILITY	Φ0.8mm steel to small scissors
DETECTION ADJUSTMENT	Step-less
DETECTION WIDTH	600mm
DETECTION HEIGHT	100mm (Standard type)
ALARM METHOD	Buzzer , Lamp
BELT SPEED	(approx.) 40m/min
POWER SUPPLY	Single phase
RATED OUTPUT	(approx.) 140W
DIMENSIONS	1,050(L)×1,650(W)×920(H)mm
WEIGHT	(approx.) 250kg
FEATURES	●Blue LCD New conspicuous blue LCD indicates detecting positions,detection signal levels from each coil and more infomation. ●φ0.8mm  This machine has adopted new design detecting sensor so that φ0.8mm is available at Detecting 100mm height. It promises to increase detecting accuracy. ●30% up  New design detecting sensor has also good noise performance that is increased about 30% than previous model. ●30% up  The detecting sensitivity is more stable in the detecting area. The new model gets more stable result against NC products than before.(100 mm height) ●Sensitivity level monitor  New designed level monitor is more easy to check the sensitivity level and detecting position lamp is divided to 10 pieces that shows foreign object exactly. ●Return device  This machine has return device that the products return to a operator after making alarm when the machine detects foreign object in a products. ●40m/min (50/60Hz)  This belt speed that connect to detecting speed is no.1 on this class. ●Data collection  The detecting result is able to collected to your computer by optional software from the needle detector. The collected data can be used for analyzing. ●Counter/Product guider  These devices are option equipments

HP-54

MODEL HP-54 POWER SUPPLY Single phase RATED OUTPUT 1,320W 2,000W MAX.TEMPERATURE 180℃ MAX.PRESSURE 200g/cm2 DIMENSION OF PLATE 500×400mm DIMENSIONS 580(W)×870(D)×770(H)mm WEIGHT (approx.) 50kg FEATURES The aluminium plate and the special motor provide the warpless surface of the plate, and assure uniform temperature distribution. The silicon mat assures uniform pressure and printing work. The horrizontal rocking system of the pressure mechanism gives uniform pressure to make no slippage of products. Two-step rocking handle mechanism allows easy working under high pressure. Anti-static type Teflon sheet is used for the upper press plate, ensuring the plate stays clean.

＜CHEMICAL

NEW CLEAN SPRAY

ROLL SINTERACE

MODEL	ROLL SINTERACE
FEATURES	Reverse material and front material can fuse on one line continually. Auto stop device is equipped. When finish front or back material. The machine stops automatically.

TOP FUSING MACHINE＞HPM-600CA

MODEL	HPM-600CA
POWER SUPPLY	Three phase or Single phase
RATED OUTPUT	HEATER：7,400W
	MOTOR：90W
FUSING WIDTH	600mm
PRESSURE	5.0kg/cm2
MAX.TEMPERATURE	200℃
INSTALLATION DIMENSIONS	2,050mm×1,200mm
WEIGHT	(approx.) 296kg
FEATURES	Drum heater assures sufficient material heating from the every start of operation, just the same as flat type heating. Temperature is automatically controlled by means of an electronic thermostat and SSR, and it maintains a sensitive thermostatic switch that turns on and off alternately, and the control temperature difference range is always within ±5℃. Uniformity and high pressure are maintained by a new air cylinder, a silicon rubber roller and pressure support roller. Anti-static type Teflon belt assures longer belt life, and belt cleaning and maintenance is easy made. Belt Warping Prevention Device (patent) maintains the belt at the same position at all times, so the operator needs only to insert the fabric. An inspection window in the center of the operation table provides a clear view of the fabric.

SINTERACE

MODEL	SINTERACE
POWER SUPPLY	Three phase
DIMENSIONS(mm)	(W)1,540×(L)850×(H)1,260mm
FUSING WIDTH	1,000×500mm
WEIGHT	(approx.) 400kg
FEATURES	It can be short lead time of production by making out continuos production in factory. Sewing after laminating saves sewing process. Using special paste powder provide clean working circumstance. It can be cut middle process material as stock by laminating piece by piece. Cutting front material and reverse material separately improve recycling and save transportation fee. ※ Required air compressor over 2 hose power.

HP-450M,MS

MODEL	HP-450M,MS
POWER SUPPLY	Single phase
RATED OUTPUT	HEATER：4kw
	MOTOR：33W
TEMPERATURE(MAX)	195℃
PRESSURE(MAX)	1.5kg/cm2
BELT SPEED(MAX)	8.7m/min
HEATING TIME	5～20sec
FUSING WIDTH	450mm
DIMENSION	W：1,660mm
	D：880mm
	H：460mm
NET WEIGHT	(approx.) 152kg
FEATURE	Automatic belt warping prevention device. Upper belt warpping prevention system adopt direct limit switch type like lower belt warping prevention system. Increase the fusing belt width for 450mm Adopted rubber driving roller for non-slip driving. MS MODEL has been equipped rotary strip-off device.

Product Catalog HP-450 FUSING PRESS MACHINE

Specifications︰	Fusing Temperature: 0--200℃. Fusing Width: 0--450mm. Power Supply: 220V, 50Hz. Size: 166x88x49cm.
Advantages︰	Customers can chose Seam belt and Seamless belt
Export Markets︰	All world
Standard Met︰	ISO9001:2000

NHG600-900-1200

1. 

Fusing Press Machine NHG-600-900-1000-1200-1600-1800 -

 

Product Description

The Fusing Width option as follows: 600mm, 900mm, 1000mm, 1200mm, 1400mm, 1600mm, 1700mm, 1800mm

Specifications︰ Power: 380v,50Hz, 3 Phase Fusing/working width: 600-900-1200mm Pressure system: Spring roller/ Pneumatic system with Air pump Target Temperature: 0--200, 0--240. Advantages︰ 1, High quality performance 2, with high quality famous brand spare. 3, with seamless belt for long time working. Export Markets︰ Asia, America, Europe, Africa, Mid-east

OSHIMA ON-V740C

             OSHIMA ON-V740C


     

Voltage: AC220-250V or 110V Power: 140w Size:1820mm x 1050mm x 900mm--or more hieght Detecting Width:600mm Detecting Height:200mm---584mm Weight: 150kgs  or more Min Metal Size Inspected: 0.5-0.7mm Sensitiveness Adjusting: 1-10 Non-grade adjusting

 

HP-900LF,LFS

MODEL	HP-900LF,LFS
POWER SUPPLY	Three phase
RATED OUTPUT	HEATER：12kw
	MOTOR：295W
FUSHING WIDTH	900mm
MAX.BELTSPEED	10.2m/min
MAX.PRESSURE	41N/cm2（4.02kg/cm2）
MAX.TEMPERATURE	195℃
HEATING TIME	6～28sec.
DIMENSIONS	1,200×1,490×3,300mm
WEIGHT	(approx.) 450kg
FEATURES	This is a continuous type machine therefore production is greatly increased. The automatic Belt Warping Prevention Device keeps both the upper and lower belts in the same position. Using the feed back system, damage is prevented. (Patent Pending) Using the electronic thermostat and the SSR, the temperature difference’s range is kept at ±3℃. The SSR’s electronic parts have no contact points making for durability. Various stackers can be used with this machine. This machine has a front conveyor belt which greatly increases production levels. The Rotary Strip Off Device can be attached as optional equipment. By pushing the heater control switch the temperature of the upper and lower or front and rear heater can be easily controlled. This means various materials can be used safely. The pressure roller is covered with a layer of silicon rubber. The upper and lower pressure rollers are completely separated when the pressure is set at 0. The heating plate is covered with special hard alumite, making it durable. The exchange of belts is very easy. The Belt Stopping Device stops the belt automatically if the belt warps therefore protecting the belt. The entrance of the feed in point can be adjusted easily according to the thickness of the material and interlining being used. An anti puckering roller is installed in this machine. This roller’s position can be adjusted. Wing tables can be attached to the work table. When these tables are not in use, they can be folded down. (Option) The pressure is easily adjusted. Depending on which of the optional tables is used, various shapes can be easily pressed.

HP-800TS-Ⅱ

	■ ILLUSTRATION OF PRODUCTS ILLUSTRATION
MODEL HP-800TS-Ⅱ POWER SUPPLY Three phase or single phase RATED OUTPUT HEATER：4,500W MOTOR：90W(Strip-off device:25W) MAX.TEMPERATURE 200℃ MAX.PRESSURE 500ｇ/cm2 MAX.BELT SPEED 6m/min HEATING TIME 6～60sec FUSING WIDTH 800mm DIMENSIONS 1,240(W)×1,115(D)×1,280(H)mm WEIGHT (approx.) 230kg FEATURE A strong sillcon rubbered roller ensures uniform pressure. Electric thermostat and S.S.R(Solid State Relay) control the temperature difference to a minimum, and “electrical contactpointless” components are used. Belt warping is automatically corrected, therefore, the operator only needs to insert the material. A smooth-surfaced heat-proof Teflon belt is used, so belt cleaning is easy. A more powerful and quiet induction motor is used to increase efficiency. This machine has a larger receiver, which allow stacking of a larger quantity of products. A touch & open type side cover is used to make inspection and maintenance of the machine easier. Two cleaners are installed. One is on the belt and the other is on the drum to prevent trouble such as resin strike back. Casters allow easy movement of the machine therefore it’s position in the factory can be easily changed. OPTIONAL EQUIPMENT A rotary strip-off device

	｜HOME｜ Products Information｜Technology｜Company Information｜News Release｜Links｜Contact Us｜Site Map｜
	All Rights Reserved,

OP-450GST OSHIMA

Films

• Film: Fusing interlining using continuous fusing machine Oshima

Those who bought this product, also bought

• ROLLING SYSTEM OSHIMA - Auto feeding and collecting system for OP-450GS/OP-520GS fusing presses
• Rollax - Powder for cleaning fussing presses' belts (can of 250 g)

Back

PTFE(TEFLON) Seamless Fushing Machine Belt/Fushing Belt/endlss belt

 

PTFE seamless fusing machine belt is made of high tensile fiberglass or Kevlar, knitted by special equipment and coated with fine PTFE. Seamless belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are much longer than all kinds of joint PTFE Fusing Machine Belt.Features of PTFE Teflon Seamless fusing machine belt:1)High temperature resistance, Hygienic and Easily Cleaned Surface; 2)Continuous Service Temperatures from -40 to +500°F (-40 to +260°C)3)Good tensile strength, preventing deflecting;4)Excellent capability of resistance of static;5)Smooth surface, more suits for super thin lining;6)Flex fatigue resistance, durable, long using life;7) Standard and custom products, (Max. Width: 2200mm, Max. Seamless Girth: 6700mm) 

Fusing Machine Belts

Product Details Company Profile

Quick Details

Place of Origin: Delhi India	Brand Name: Fusing Machine Belts	Model Number: Hashima, Oshima, Reliant, Summit,...
Fusing Machine: Belts and Spare Parts

Specifications

Seamless, Common Seam, Buttoned, Eyelet, Rope Fusing Machine Belts.
We supply all kind of Fusing/Needle Detector, Industrial Belts 

We would like to introduced ourselves as a leading distributor of electronic/elecctrical components, spare parts and devices of inspection and metal/Needle detector machines.

We deal in all spare parts of Lock, Cintex, Hashima, Easement, Duke, Nova,  Qmax, Oshima, Fiblon, Besta YDS etc.

We also deal in conveyor systems and fusing machine belts (Seamless/common seam).
These belts are used in all branded fusing machines like Hashima, Reliant, Veit Kennegieser, Shinko Summit, Oshima, Fiblon, Meyer, Macpi, Stitch Plus, Meyer, Protex, Aura etc.

We supply these parts, components and belts worldwide at very comptetive price to our customers. 

You can also contact for Hi-tech machines ie. Fusing, Pressing, Needle detector, Drycleaning CAD/CAM etc.

Kindly send us your query/suggetions for the same.

Looking forward to hear from you soon.

Thanking you,

AMPLE MACHINERY PVT. LTD.

Reg. Office: A-2/708, Street No.-29, South Gamri, Delhi-110053. 

Corp. Office: DA-4, Dua complex, Shakarpur, Delhi-110092

Mob: +91 9999637940/9350255024/9717831124

Tel:- 91-011-32063369/65257820 Fax: 011-23812355,

Webpage: www.amplemachinery.com

Yaxing's PTFE fusing machine conveyor belt

Item No.	Size
HP-220K(lower)	220*1830
HP-220K-ii(upper)	220*2230
HP-330K(upper)	330*1550
HP-330K(lower)	330*1830
HP-450K(upper)	450*1550
HP-450K(lower)	450*1830

Oshima Seamless Fusing Machine Belt

Size	L(upper)	L(lower)	S(upper)	S(lower)
460	1540	1830	0.71	0.84
625	1400	2000	0.88	1.25
625	1800	2400	1.13	1.50
610	2450	2450	1.49	1.49
910	2450	2450	2.23	2.23

HP-84B

MODEL	HP-84B
POWER SUPPLY	Single phase
RATED OUTPUT	2,000W
MAX.TEMPERATURE	180℃
MAX.PRESSURE	125g/c㎡
DIMENSION OF PLATE	800×400mm
DIMENSIONS	650(D)×830(W)×770(H)mm
NET WEIGHT	(approx.) 53kg
FEATURES	Operates on standard household current. Threephase Wiring is not required. The two-stage pressure system applies vertical pressure on material to completely eliminate slippage between cloth and padding. Two-stage pressing increases pressure for high-efficiency pressing while reducing machine size and power consumption. The oversize,800*400mm press plate increases versatility, makes material handling easier. Uses a strip heater with excellent thermal efficiency for longer life. Protected against disconnection.

Basic

 

MODEL	HP-450M,MS
POWER SUPPLY	Single phase
RATED OUTPUT	HEATER：4kw
	MOTOR：33W
TEMPERATURE(MAX)	195℃
PRESSURE(MAX)	1.5kg/cm2
BELT SPEED(MAX)	8.7m/min
HEATING TIME	5～20sec
FUSING WIDTH	450mm
DIMENSION	W：1,660mm
	D：880mm
	H：460mm
NET WEIGHT	(approx.) 152kg
FEATURE	Automatic belt warping prevention device. Upper belt warpping prevention system adopt direct limit switch type like lower belt warping prevention system. Increase the fusing belt width for 450mm Adopted rubber driving roller for non-slip driving. MS MODEL has been equipped rotary strip-off device.

_____________________________________________________________________________

 

Fusing
Fusing press HASHIMA 450CS (Japan)
In order to ensure high quality of products some parts have to be fused so that they keep shape, for instance, a collar and a front fastening part of clothing. The fusing press can be used also for transfer printing.

____________________________________________________________________________

Features:

• The upper buck heating system consists of three parts, which can be adjustable according to the different parts.
• Lower buck have strongly pressure.
• Special high-pressure system.
• The machine uses special heater and electronic auto controller can be adjusted according to the various kinds of fabric.
• High efficiently and save time and labor. Its production is 180-230 pieces per hour in average.

Specification

Model	OP-588
Voltage	1P/220V
Heater	2.3KW
Temperature controller	Electric Automatism
Standard temperature	-180¢J
Air pressure	0.6MPA
Air consumption	16L/¦¸
Total pressure	890.6KG
Unit pressure	0.52MPA
Packing volume	1200*1020*1525MM
Weight	250KG

_________________________________________________________________________________

___________________________________________________________________

 

____________________________________________________________________________

 

___________________________________________________________________________

 

MODEL	HN-670C,680C
DETECTION METHOD	Magnetic induction
DETECTION ABILITY	Φ0.8mm steel to small scissors
DETECTION ADJUSTMENT	Step-less
DETECTION WIDTH	600mm
DETECTION HEIGHT	100mm (Standard type)
ALARM METHOD	Buzzer , Lamp
BELT SPEED	(approx.) 40m/min
POWER SUPPLY	Single phase
RATED OUTPUT	(approx.) 140W
DIMENSIONS	1,050(L)×1,650(W)×920(H)mm
WEIGHT	(approx.) 250kg
FEATURES	●Blue LCD New conspicuous blue LCD indicates detecting positions,detection signal levels from each coil and more infomation. ●φ0.8mm  This machine has adopted new design detecting sensor so that φ0.8mm is available at Detecting 100mm height. It promises to increase detecting accuracy. ●30% up  New design detecting sensor has also good noise performance that is increased about 30% than previous model. ●30% up  The detecting sensitivity is more stable in the detecting area. The new model gets more stable result against NC products than before.(100 mm height) ●Sensitivity level monitor  New designed level monitor is more easy to check the sensitivity level and detecting position lamp is divided to 10 pieces that shows foreign object exactly. ●Return device  This machine has return device that the products return to a operator after making alarm when the machine detects foreign object in a products. ●40m/min (50/60Hz)  This belt speed that connect to detecting speed is no.1 on this class. ●Data collection  The detecting result is able to collected to your computer by optional software from the needle detector. The collected data can be used for analyzing. ●Counter/Product guider  These devices are option equipments
STANDARD	Foot Switch.
OPTION	COUNTER , PRODUCT GUIDER

_________________________________________________________________________________

 

_______________________________________________________________________________

 

_______________________________________________________________________________

_____________________________________________________________________________

 

______________________________________________________________________________

 

_____________________________________________________________________________

 

_________________________________________________________________________________

 

_____________________________________________________________________________

 

______________________________________________________________________________

 

_______________________________________________________________________________

 

________________________________________________________________________________

 

_______________________________________________________________________________

 

_____________________________________________________________________________

 

______________________________________________________________________________

 

_______________________________________________________________________________

 

_____________________________________________________________________________