| MODEL | HPM-600CA |
| POWER SUPPLY | Three phase or Single phase |
| RATED OUTPUT | HEATER：7,400W |
| MOTOR：90W | |
| FUSING WIDTH | 600mm |
| PRESSURE | 5.0kg/cm2 |
| MAX.TEMPERATURE | 200℃ |
| INSTALLATION DIMENSIONS | 2,050mm×1,200mm |
| WEIGHT | (approx.) 296kg |
| FEATURES | Drum heater assures sufficient material heating from the every start of operation, just the same as flat type heating. Temperature is automatically controlled by means of an electronic thermostat and SSR, and it maintains a sensitive thermostatic switch that turns on and off alternately, and the control temperature difference range is always within ±5℃. Uniformity and high pressure are maintained by a new air cylinder, a silicon rubber roller and pressure support roller. Anti-static type Teflon belt assures longer belt life, and belt cleaning and maintenance is easy made. Belt Warping Prevention Device (patent) maintains the belt at the same position at all times, so the operator needs only to insert the fabric. An inspection window in the center of the operation table provides a clear view of the fabric. |
No comments:
Post a Comment