Rahima Fusing Servicing Centre: Basic

MODEL	HP-450M,MS
POWER SUPPLY	Single phase
RATED OUTPUT	HEATER：4kw
RATED OUTPUT	MOTOR：33W
TEMPERATURE(MAX)	195℃
PRESSURE(MAX)	1.5kg/cm²
BELT SPEED(MAX)	8.7m/min
HEATING TIME	5～20sec
FUSING WIDTH	450mm
DIMENSION	W：1,660mm
	D：880mm
	H：460mm
NET WEIGHT	(approx.) 152kg
FEATURE	Automatic belt warping prevention device. Upper belt warpping prevention system adopt direct limit switch type like lower belt warping prevention system. Increase the fusing belt width for 450mm Adopted rubber driving roller for non-slip driving. MS MODEL has been equipped rotary strip-off device.

_____________________________________________________________________________

Fusing
Fusing press HASHIMA 450CS (Japan)
In order to ensure high quality of products some parts have to be fused so that they keep shape, for instance, a collar and a front fastening part of clothing. The fusing press can be used also for transfer printing.

____________________________________________________________________________

Features:

The upper buck heating system consists of three parts, which can be adjustable according to the different parts.
Lower buck have strongly pressure.
Special high-pressure system.
The machine uses special heater and electronic auto controller can be adjusted according to the various kinds of fabric.
High efficiently and save time and labor. Its production is 180-230 pieces per hour in average.

Specification

Model	OP-588
Voltage	1P/220V
Heater	2.3KW
Temperature controller	Electric Automatism
Standard temperature	-180¢J
Air pressure	0.6MPA
Air consumption	16L/¦¸
Total pressure	890.6KG
Unit pressure	0.52MPA
Packing volume	120010201525MM
Weight	250KG

_________________________________________________________________________________

___________________________________________________________________

____________________________________________________________________________

___________________________________________________________________________

MODEL	HN-670C,680C
DETECTION METHOD	Magnetic induction
DETECTION ABILITY	Φ0.8mm steel to small scissors
DETECTION ADJUSTMENT	Step-less
DETECTION WIDTH	600mm
DETECTION HEIGHT	100mm (Standard type)
ALARM METHOD	Buzzer , Lamp
BELT SPEED	(approx.) 40m/min
POWER SUPPLY	Single phase
RATED OUTPUT	(approx.) 140W
DIMENSIONS	1,050(L)×1,650(W)×920(H)mm
WEIGHT	(approx.) 250kg
FEATURES	●Blue LCD New conspicuous blue LCD indicates detecting positions,detection signal levels from each coil and more infomation. ●φ0.8mm This machine has adopted new design detecting sensor so that φ0.8mm is available at Detecting 100mm height. It promises to increase detecting accuracy. ●30% up New design detecting sensor has also good noise performance that is increased about 30% than previous model. ●30% up The detecting sensitivity is more stable in the detecting area. The new model gets more stable result against NC products than before.(100 mm height) ●Sensitivity level monitor New designed level monitor is more easy to check the sensitivity level and detecting position lamp is divided to 10 pieces that shows foreign object exactly. ●Return device This machine has return device that the products return to a operator after making alarm when the machine detects foreign object in a products. ●40m/min (50/60Hz) This belt speed that connect to detecting speed is no.1 on this class. ●Data collection The detecting result is able to collected to your computer by optional software from the needle detector. The collected data can be used for analyzing. ●Counter/Product guider These devices are option equipments
STANDARD	Foot Switch.
OPTION	COUNTER , PRODUCT GUIDER